WELDING MODE OPERATION

The Weld-CHRON will enter welding mode when the welding current sensed by the transducer exceeds the fixed trigger level, typically 15-20 amps.

During welding, the Weld-CHRON displays the duration of the current weld in seconds.  The format of the display is M:SS.    The arc symbol   in the upper left corner is illuminated during a welding operation.

At the completion of the weld, the display will pause in this state for a few seconds, and then begin to alternate through the cumulative information displays.

Weld-CHRON Arc Weld Timer

NON-WELDING MODE OPERATION

During non-welding (idle), the Weld-CHRON cycles between three screens:

  • Total number of weld strikes since last reset
  • Duration of last weld
  • Total accumulated arc time since last reset.

Weld-CHRON Arc Weld Timer Operation